A community for mutual assistance and knowledge sharing
Download apk package
My suggestion would be to run Apple Hardware Test.
How to use Apple Hardware Test:
1» Disconnect all external devices except keyboard, mouse, display, Ethernet connection (if applicable), and connection to AC power. Apple Hardware Test might display an error message if you don't disconnect all other devices.
2» Make sure that your Mac is on a hard, flat, stable, well-ventilated work surface.
3» Shut down your Mac.
4» Turn on your Mac, then immediately press and hold the D key on your keyboard. Keep holding the D key until you see the Apple Hardware Test icon:
5» Select your language and click the right arrow. If you aren't using a mouse, you can use the up and down arrows to select a language, then press the Return key.
6» To begin testing, click the Test button, press T, or press Return. Optionally select "Perform extended testing" before beginning the test. This performs a more thorough test that takes longer to complete.
7» When the test is complete, review your test results in the lower-right section of the window.
8» To quit Apple Hardware Test, click Restart or Shut Down at the bottom of the window.
More here : https://support.apple.com/en-gb/HT201257.
Run Check Disk from a Command Line to Check for and fix Disk Errors.
1» go to start type cmd run as administartor
2» type chkdsk /F /R C:
3» wait till it ends then restart computer
If the host system does not have a processor that supports hypervisor applications and you enable hypervisor application in the virtual machine, when the virtual machine starts, you see the message: "Virtualized intel VT-x/EPT is not supported on this platform. Continue without virtualized Intel VT-x/EPT?"
Shut down or power off the virtual machine. You cannot change the setting while the virtual machine is powered on or suspended.
1- From the VMware Fusion menu bar, select Window > Virtual Machine Library.
2- Select a virtual machine and click Settings.
3- In the Settings window, in the System Settings section, select Processors & Memory.
4- Click to expand Advanced Options and select the check boxes for the options
Perform System Restore, to return to a previous state – when your computer was functioning correctly. It can also change Internet Explorer settings, scripts, batch files, and other kinds of executable files on your computer.
Note: System Restore does not affect personal files, such as e-mail, documents, or photos.
How to Perform System Restore : http://www.dummies.com/computers/operating-systems/windows-xp-vista/how-to-restore-your-system-to-an-earlier-point/
Did you install it correct like shown on this vedio
Follow all steps like on vedio and see again
The final solution i could give try to install this player and see its a full codec player can play any kind of files on the web mp3,vedios....etc.
I think the internet is a great way of meeting people. I have met a lot of people and been on lots of dates through the internet. Only one of them became a relationship though. The focus should not be on finding a boyfriend or girlfriend, but on meeting different people.
In some cases people have run into this error when the wrong audio device is selected in Windows Media Player.
a. Open Windows Media Player.
b. Click on Tools, select Options.
c. Click on Devices, and then select Speakers.
d. Now, select Properties, it will allow you to change it.
To fix make the free upgrade to modern browsers they’re more secure and provide a better web experience overall.
visit this http://whatbrowser.org to see if your browsers is up to date .
could you upload a screenshoot from your laptop !
When dealing with codecs, more does not equal better.
Having the least amount on your system is the best configuration.
This is exactly what these codec releases will do for you.
You will no longer be restricted to using any specific player.
WMP and your Windows Media Center setup will play all your files.
The following filetypes are enabled and SUPPORTED by the installation of Shark's Codec Solutions.
amr | mpc | ofr | divx | mka | ape | flac | evo | flv | m4b | mkv | ogg | ogm | rmvb | xvid| y4m
All of the above filetypes can be queued to the Windows Media Player Playlist using a right-click.
what platform Wordpress Or Jommla or ....etc, ?
Method 1: Re-enable the device
To fix the problem, follow these steps (Steps below are for your reference. The specific steps in different system versions may be different. ):
1) On your keyboard, press the Windows logo key and R at the same time to invoke a Run command. Type devmgmt.msc in the run box and click on OK button.
2) Locate the Sound, video and game controllers category in the list.
If you don’t see this category in your list, continue with step 2a) below. Otherwise skip to step 3.
2a) Click the Action menu and select Add Legacy hardware (if you see only the Help in this menu, click somewhere in the white space around the list (i.e. make sure nothing in the tree is selected), then click the Action menu again)
2b) Click Next to start the Add Hardware wizard. (If the Add Hardware wizard doesn’t display at all, skip to Method 3 below.)
2c) Select Search for and install hardware automatically (Recommended).
2d) If the wizard tells you it can’t find any new hardware, click Next.
2e) You should now see a list of hardware types. Scroll down until you see Sound, video and game controllers. Select it and click Next.
2f) Select the manufacturer and model of your sound card, then click Next. (If you’re not sure what manufacturer and model to select, skip to Method 3 below.)
2g) Click Next to install the device, then when the installation is complete, click Finish.
3) Expand the Sound, video and game controllers category, and right-click on your audio device. Click Enable in the pop up menu. (If the device is already enabled, skip to Method 2 below.)
Method 2: Manually uninstall & reinstall the device driver
1) Still in Device Manager, once again expand Sound, video and game controllers, right-click on your audio device, and click Uninstall to uninstall the driver.
2) Restart your PC. After restarting, Windows should automatically re-install the sound driver. Assuming it installs the latest correct driver, this may resolve the problem.
Method 3: Automatically update your audio device drivers
Your sound problem is probably being caused by driver issues. The steps above may resolve it, but if they don’t, or you’re not confident playing around with drivers manually, you can do it automatically with Driver Easy.
Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.
You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):
1) Download and install Driver Easy. http://www.drivereasy.com/DriverEasy_Setup.exe
2) Run Driver Easy and click Scan Now. Driver Easy will then scan your computer and detect any problem drivers.
3) Click the Update button next to a flagged audio driver to automatically download and install the correct version of this driver (you can do this with the FREE version). Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).
after traduction i got this : Do you have it? Do you want to go back to your home ????????
try to translate your quastion from google traduction and pass it here .
check if any helps:
-Click or tap the Start button
-Open the Settings application
-Click or tap on "System"
-In the pane on the left of the screen scroll all the way to the bottom until you see "Tablet Mode"
-Ensure the toggle is set to off to your preference.
Are you using the built in windows firewall or are you using a 3rd party firewall ,if not follow steps on this link https://www.sevenforums.com/tutorials/139321-media-sharing-using-windows-media-player-enable-disable.html
also try watch this vedio:
--> Verify if the drive is recognized in BIOS/System Setup
Ensure that the drive is recognized in the BIOS/System Setup. This step is applicable for computers with internal drives only.
Restart your computer and tap the F2 key while it is restarting.
Verify if the drive is detected in BIOS
If the drive is not detected in BIOS, you may need to disconnect and reconnect the drive on your computer.
--> Run the Microsoft CD/DVD Fix it troubleshooter
Microsoft Fix it is a diagnostic software developed by Microsoft which allows detecting potential troubles which may affect a computer running on Microsoft Windows.
To automatically fix common issues with CD or DVD drives, click the Run now link below, and then follow the on-screen instructions.
Update or reinstall the driver for the optical disk drive
Drivers for your CD, DVD or Blu-Ray drive is included within the Operating System and hence does not require you to install a specific driver. Uninstalling the driver and restarting the computer will reinstall the driver which will resolve most issues related to the device driver.
To uninstall and reinstall the driver, follow the instructions below:
1- Press the Windows key + R to open the Run dialog box.
2- Type devmgmt.msc in the Run dialog box, then press Enter key.
3- In the Device Manager window, expand DVD/CD-ROM drives. Right-click the CD/DVD/Blu-Ray drive that is listed, and then click Uninstall.
4- Click OK to confirm that you want to remove the device.
5- Restart your computer (Once the restart is complete, the Operating System will automatically install the required drivers).
Hope all this can Help
Try the following:
Right-click the Start button > Command Prompt (Admin)
Then, at the command prompt type the following ( you can copy and paste) and press "Enter":
reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
Restart the computer.
You may check the settings in Windows Media Player. To choose devices and computers that can access your media follow the below given steps.
Click the Start button, click All Programs, and then click Windows Media Player.
If the Player is currently open and you’re in Now Playing mode, click the Switch to Library button in the upper-right corner of the Player.
Click Stream, and then click ‘More streaming options’.
More streaming options won't appear on the Stream menu until after you turn on home media streaming.
On the Media streaming options page, do any of the following:
If you want to stream media to all computers and devices on your network, click Allow All.
If you don't want to stream media to any computers or devices on your network, click Block All.
If you want to stream media to some computers and devices, click either Allowed or Blocked on the menu next to each item in the list of computers and devices.
For more details on Play to settings follow the links given below.
Change settings for streaming media in Windows Media Player
Using the ‘Play To’ feature to stream media
Hope this information is helpful.
Hi @TZH ,
--> Why You Shouldn’t Defragment a Solid State Hard Drive
Defragmenting a traditional hard disk drive is considered standard maintenance due to the way the spinning platters and read/write heads move when searching for data. This is because the process essentially ‘reorganises’ all file information, allowing it to be stored in an unbroken sequence of blocks on the drive and this means the heads are able to read the data faster.
With a solid state drive however, it is recommended that you should not defragment the drive as it can cause unnecessary wear and tear which will reduce its life span. Nevertheless, because of the efficient way in which SSD technology functions, defragmentation to improve performance is not actually required.
SSDs are able to read blocks of data that are spread out over the drive just as fast as they can read those blocks that are adjacent to one another. Furthermore, they keep track of the order the files are written using a technique called ‘wear-levelling. This purposely writes data to the drive in such a way that its cells wear out evenly; which means that the drive does not degrade prematurely.
What to do if Windows 10 Prevents You From Installing Antivirus Software
--> Solution 1 – Make Sure You Don’t Have Any Other Antivirus Installed
--> Solution 2 – Turn Off Windows Defender :
Here’s exactly how to do that:
1- Go to Settings app, and then to Update and security
2- Go to Windows Defender tab
3- Uncheck Real-time Protection
Now your Windows Defender is disabled, and you can try to install your antivirus program again.
If you’re using some ‘less famous’ antivirus, there’s a chance that it’s not compatible with Windows 10. So, just in case, check out our list of all antivirus programs that are compatible with Windows 10, and if your antivirus is not on the list, you should consider getting a new protector of your system.
That would be all, I hope these solutions helped you with your antivirus problem.
Cameras in laptops are generally used as web cam for VDO calling purpose and not for photography. We don't save and use pics taken by laptop cameras. And will be inconvenient to take pics using laptop camera.
Also for VDO calls picture size must be at lower side for live VDO. And high quality VDO transfer over the network will add lag in live VDO.
In short - there is no need of high quality (web) cameras in laptop.
1) open wise care --> system cleaner --> look down you will found "select all " click on it and then scan
2) in the same window on system cleaner go to advanced cleaner --> look down click on Advanced Settings --> then do "select all " -->press OK --> do a scan and delete all founded files .
3) disable reserved space for trash to do this go to trash ---> right click on it --> propreties ---> and select 2nd option "dont transfer files to trash" ---> apply and ok
4) disable reserved space for system restore to do this go to --> start --> type this in search filed " SystemPropertiesAdvanced " --> click on the result --> go to system protection tab --> if you look down you will find its activated on your C:\ so slect it and press configure like this image :
--> then slide the MAx usage to 1% and dont forget to hit Turn off system protection (also delete old restor point if you dont need by pressing delet bottom ) ---> apply OK
i hopre by doing the full steps you will get more space
Prt: Olá invistindo no cripto é a nova geração nos mercados, muitos tornaram-se ricos. Mas, na minha experiência sobre isso, os preços do mercado são muito instáveis, não são estáveis, como o ouro e o petróleo. Além disso, muitas empresas são golpistas, eu estava trabalhando na mineração da nuvem com eles e eles fecharam tão cedo, como o sieerahash.com você pode pesquisar no google . Meu amigo, minha sugestão é evitar o dinheiro em outros domínios mais seguro e estável.
Você amigo chakramed.
En: Hello invisting in crypto is the new generation on markets many have becomes rich . But , in my experiance on this its very very instable market prices are not stable like gold and oil .Also many companies are scammers I was working in cloud mining with them and they close up so soon ,like sieerahash.com you can search on google . My friend my suggestion is to go inviste you money in other domain more secure and stable .
You friend chakramed.
1- Laptop Battery not charging "plugged in, not charging" Easy fix
2- how to check your laptop battery life
When chosing a WordPress theme for your site you need to ask yourself a few questions.
1. Do you really need lots of features, custom theme admin options, sliders, and other goodies for your website?
2. Can you troubleshoot WordPress issues on your own or you need help with them?
3. Do you want a professional looking theme that’s not very common or you are fine with a basic layout?
look here you will get your answear http://www.wpbeginner.com/beginners-guide/decide-premium-free-wordpress-themes/
Might be region locked. You might want to try a firmware upgrade.
To get complete answee read this article from this link https://www.tomsguide.com/us/avoid-windows-defender,news-22729.html
In my view " ITS NOT ENAGHT YET " because defender offer ths basic anu malawre for users whom not installling security software yet . So its better to install another security software .
You will recive asap dont worry about your gift either points or $$ admins here are nices.